HP Vectra VE 5/xxx - 2 User Manual page 94

Windows 3.11
Windows 95
5 Troubleshooting Your PC
If Your PC Has a Hardware Problem
If Your Display is Blurred or Unreadable
If you select the wrong display in the HP User Tools menu, the display
screen may become blurred or unreadable. To correct this problem:
1 Restart the PC — either switch the PC off then on, or press
and
(POST).
2 When the POST is finished, press
display the MS-DOS prompt (
3 Type
CD C:\WINDOWS
4 Type
SETUP
5 Press the up-arrow key to select the
.
6 Select the line, and press
VGA
7 Press again to accept the configuration.
8 Press
9 If necessary, type
10 When Windows starts, select the correct display with HP User Tools.
When you change the display type when using Windows 95, a
confirmation box is displayed prompting you to confirm the selection.
However, if you have selected the wrong display type and cannot read
the screen message because the screen is blurred, the display type will
automatically return to the previous selection after approximately 15
seconds.
82 English
. The PC will perform its Power-On-Self-Test
Delete
to bypass the startup files and
).
C:\
.
.
Display
and to restart the PC.
Delete
to restart Windows.
WIN
line, and press
.