3 How to Install Accessories In Your PC
Installing Mass Storage Devices
5 Connect the power cable and the data cable to the rear of the drive.
The connectors are shaped to go in one way only.
6 Install any other accessories before replacing the cover. Reconnect
all cables and power cords.
Installing an IDE Hard Disk Drive in the Bottom Shelf
The PC has an integrated Enhanced IDE controller which supports two
Fast IDE hard disk drives.
Refer to the drive's manual to see if you must set jumpers or if there is
a special installation procedure to follow.
1 Disconnect the computer's power supply cord from the power outlet.
Disconnect any connection to a telecommunications network.
2 Remove the computer's cover.
3 If there is a device in the middle shelf, remove it.
40
English
Data cable
Power cable