HP Vectra VE 5/xxx - 2 User Manual page 103

WARNING
3 Ensure that the clip is in place and holds the battery firmly.
You can also install an external battery (HP part number 1420-0513),
which you can order from your authorized reseller.
Install the external battery as follows:
1 After removing the computer's cover, connect the external battery
cable to the battery connector on the system board.
2 Mount the external battery on the backplane, using the self-adhesive
strip supplied.
After installing either a replacement or an external battery, replace the
computer's cover and run the Setup program to reconfigure the
computer.
There is a danger of explosion if the battery is incorrectly installed. For
your safety, never attempt to recharge, disassemble, or burn the old
battery. Replace the battery only with the same or equivalent type
recommended by the manufacturer. The battery in this PC is a lithium
battery which does not contain heavy metals, nevertheless, in order to
protect the environment, do not dispose of batteries in household
waste. Please return used batteries to the shop from which you bought
them, or to the dealer from whom you purchased your PC, or to HP, so
that they can either be recycled or disposed of in an environmentally
sound way. Returned used batteries will be accepted free of charge.
5 Troubleshooting Your PC
If Your PC Has a Software Problem
English 91