Installing an Accessory Board
1 Disconnect the computer's power supply cord and any connection to
a telecommunications network.
2 Remove the computer's cover and power supply.
3 Find a free slot. Some boards may have preferred locations and
special installation instructions detailed in their manuals.
4 Unscrew and remove the slot cover. Store it in a safe place.
If the slot cover is tight, loosen the screws on the adjacent slots.
5 Hold the board horizontally by its "top" edge. Slide it into the board
guide of the chosen slot. Do not bend the board.
3 How to Install Accessories In Your PC
Installing Accessory Boards
English
31