Removing And Replacing The Secure Usb Compartment Cover; Removing The Secure Usb Compartment Cover - HP T5145 - Thin Client - Tower Troubleshooting Manual

7. Replace the side access panel and metal side cover. See
Access Panel and Metal Side Cover on page
8. Replace the secure USB compartment cover. See
Compartment Cover on page
9. Reconnect any external devices and power cords.
10. Turn on the monitor, the thin client, and any devices you want to test.
11. Load any necessary drivers.
NOTE:
for your specific thin client model.
12. Reconfigure the thin client, if necessary.
Removing and Replacing the Secure USB Compartment
Cover
The secure USB compartment allows you to install two USB devices in a secure location inside the thin
client. The cable management feature allows you to install a USB mouse and a USB keyboard in this
compartment. See
a hidden location, the secure USB compartment can be locked by the optional security cable lock.
CAUTION:
(131° F) in worst case conditions. Make sure the specifications for any device you install in the
compartment indicate the device can tolerate a 55° C (131° F) ambient environment.
NOTE: In addition to following these instructions, follow the detailed instructions that accompany the
accessory you are installing.
Before beginning the installation process, review
for procedures you should follow before and after installing or replacing hardware.

Removing the Secure USB Compartment Cover

Use the following procedure to remove the secure USB compartment cover.
WARNING!
off and the power cord is disconnected from the electrical outlet.
To remove the secure USB compartment cover:
1. On rear of the thin client, remove the screw that secures the compartment cover to the unit (1).
8 Chapter 2 Hardware Changes
8.
You can download select hardware drivers from HP. Go to
Installing the USB Device on page 12
The ambient temperature inside of the secure USB compartment can reach up to 55° C
Before removing the secure USB compartment cover, ensure that the thin client is turned
Removing and Replacing the Side
10.
Removing and Replacing the Secure USB
for more information. Along with providing
General Hardware Installation Sequence on page 7
http://www.hp.com and search