Installing Thin Client Options; Installing The Usb Device - HP T5145 - Thin Client - Tower Troubleshooting Manual

Installing Thin Client Options

Various options can be installed on the thin client:
●
Installing the USB Device on page 12
●
Removing and Replacing the Battery on page 13

Installing the USB Device

Before beginning the replacement process, review
on page 7 for procedures you should follow before and after installing or replacing hardware.
Insert the USB device into the USB port in the secure USB compartment. See the following
▲
illustration for the location of the ports in the secure USB compartment.
Figure 2-6
If you install a USB mouse and a USB keyboard in the secure USB compartment, route the cables
around and through the clips, then out the secure cable routing slot, as shown in the following illustration.
Figure 2-7
12 Chapter 2 Hardware Changes
USB ports in the secure USB compartment
Using the secure cable routing slot
General Hardware Installation Sequence