Setup Utility-System Information; Setup Utility-Standard Cmos Features; Setup Utility-Advanced Bios Features - HP T5145 - Thin Client - Tower Troubleshooting Manual

Setup Utility—System Information
NOTE: Support for specific Setup options may vary depending on the hardware configuration.
Table 4-2 Setup Utility—System Information
Option
Product Name
Processor Type
Processor Speed
Amount of flash memory
Memory size
System ROM
Integrated MAC
UUID
Chassis Serial #
Asset Tracking Number
Asset Tag
Setup Utility—Standard CMOS Features
Table 4-3 Setup Utility—Standard CMOS Features
Option
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Primary Master
Halt On
Setup Utility—Advanced BIOS Features
Table 4-4 Setup Utility—Advanced BIOS Features
Option
Quick Power-on Self
Test
1st Boot Device
2nd Boot Device
3rd Boot Device
Boot Up Numlock
Status
22 Chapter 4 BIOS Settings, (F10) Utility
Description
(view only)
(view only)
(view only)
(view only)
(view only)
(view only)
(view only)
(view only)
(view only)
(view only)
Enter asset tracking number.
Description
Allows you to set system date
Allows you to set system time.
Indicates ATA Flash settings.
Allows you to select system response of All Errors, No Errors, or All But Keyboard when POST
Error has been detected. Default is All But Keyboard.
Description
Allows the system to skip certain tests while booting. This will decrease the time needed to boot the
system. Enabled/Disabled. Default is Enabled
Select Boot Device Priority. Default is USB.
Select Boot Device Priority. Default is ATA Flash.
Select Boot Device Priority. Default is Network.
Select power on state for Numlock. Default is OFF.