Rear Panel Components; Installing The Rubber Feet - HP T5145 - Thin Client - Tower Troubleshooting Manual

Rear Panel Components

Figure 1-5
(1) Ethernet RJ-45 connector
(2) PS/2 connectors (2)
(3) Parallel connector
(4) Secure cable routing slot
(5) Universal serial bus (USB) connectors (2)

Installing the Rubber Feet

You may want to use your thin client in a horizontal orientation. If your unit has VESA (Video Electronics
Standards Association) holes in the side, you can install rubber feet on the left side of the unit. The
rubber feet help keep the unit safely in place.
To install the rubber feet:
1. Locate the VESA (Video Electronics Standards Association) holes in the left side of the thin client.
CAUTION:
and result in equipment damage. If your unit does not have VESA mounting holes, you will need
to obtain the optional side panels with VESA mounting holes.
2. Remove the feet from their backing.
4 Chapter 1 Product Description
Rear panel components
If you use the thin client in a horizontal orientation without the rubber feet, it may slide
(6) VGA connector
(7) Serial connector
(8) DVI-D connector
(9) Power connector