Select Image To Update - HP T5145 - Thin Client - Tower Troubleshooting Manual

Select Image to Update

Once the host settings are entered, either manually or automatically through DHCP, then click the
Refresh Image List button to make the applet query the FTP share for all XPe images whose targeted
BIOS families match the one of the current thin client system, and fill in the drop-list combo box to the
left of the button. You can choose any of the listed images to update/image the system.
When ready, you can click the Run Image Update Now button to proceed with the image update using
the selected image. A confirmation dialog similar to the following is displayed.
Click No to abort the operation. If you click Yes, the HP FTP Image Update Client confirms that the flash
drive has at least 200MB free to host the WinPE image. If the flash drive does not, the following error
message is displayed.
If the flash device has enough memory, the update client starts the download of the WinPE image,
modifies the boot loader to boot to WinPE in the next system restart, and then restarts the system to
continue to the WinPE phase.
Once WinPE is loaded, IBRPE is spawned to image the system's flash drive using the selected image
from the FTP share. When the imaging completes, IBRPE automatically restarts the system to enter the
FBA phase.
Select Image to Update 59