Unpacking The Image And Tools For Deployment; Deploying With Pxe - HP T5145 - Thin Client - Tower Troubleshooting Manual

Unpacking the Image and Tools for Deployment

1. Click Deployment.
2. When prompted, select the destination directory for the imaging tools and image.
The components that comprise DSKIMG.BIN are then unbundled. When this process is complete, there
are three new files: IBR.EXE (the image restoration utility), FLASH.xx (the OS image), and
README.TXT
NOTE: Linux uses the file name FLASH.DD while other operating system images use FLASH.IMG

Deploying with PXE

1. Ensure that IBR.exe and Flash.img are stored in the same directory on the server.
2. Add [full path]\IBR.exe -y [full path]\Flash.img hd0 to the PXE command file,
and then run it.
To view the IBR command line options: At the command prompt, type IBR.EXE /? and press Enter.
Refer to Configuring a PXE Server on page 54
Microsoft RIS. See your documentation if using a different PXE server, such as Altiris Deployment
Solution.
50 Chapter 6 Restoring the Flash Image
for instructions about setting up a PXE Server using