Removing An Hp Blade Pc Blank Bezel - HP BladeSystem bc2800 - Blade PC Reference Manual

Removing an HP Blade PC Blank Bezel

CAUTION:
or HP Blade PC blank bezel while the enclosure is powered up.
To remove the HP Blade PC blank bezel:
1. Press the ejector tabs on the HP Blade PC blank bezel (1).
2. Remove the HP Blade PC blank bezel from the enclosure (2).
Figure 3-7
Figure 3-8
Reverse the previous steps to replace the HP Blade PC blank bezel.
14 Chapter 3 Removal and Replacement Procedures
To avoid thermal events, be sure that each HP Blade PC bay contains an HP Blade PC
Removing a one-bay HP Blade PC blank bezel
Removing a five-bay HP Blade PC blank bezel