Powering Down A Blade Pc - HP BladeSystem bc2800 - Blade PC Reference Manual

Powering Down a Blade PC

1. Ensure the blade PC is not active by verifying that the Health LED (Item 2) is off.
Figure 3-5
2. If the blade is active, notify the users and stop applications as necessary.
3. Shut down the operating system. This may shut off the blade PC power.
4. If the blade PC still has power, power down the blade PC by either:
●
●
To perform an emergency shut down of the blade PC, press and hold the blade power button for four
seconds.
CAUTION:
unsaved data.
12 Chapter 3 Removal and Replacement Procedures
Blade PC LEDs
Using the Integrated Administrator, or
Pressing the power button (6) on the front of the blade PC above.
Performing an emergency shutdown on a blade PC may result in the loss of any