Weight kg
Weight lb
Rack Warnings and Cautions
WARNING!
the rack before extending a component outside the rack. Extend only one component at a time. A
rack may become unstable if more than one component is extended.
WARNING!
– Extend the leveling jacks to the floor.
– Rest the full weight of the rack on the leveling jacks.
– Attach the stabilizers to the rack if it is a single rack installation.
– Couple the racks together in multiple rack installations.
WARNING!
frame to the building structure at the top and bottom.
6
Chapter 3 Removal and Replacement Procedures
This symbol indicates the presence of electric shock hazards. The area contains no user or field
serviceable parts. Do not open for any reason.
WARNING!
To reduce the risk of injury from electric shock hazards, do not open this enclosure.
This symbol on an RJ-45 receptacle indicates a Network Interface Connection.
WARNING!
To reduce the risk of electric shock, fire, or damage to the equipment, do not plug
telephone or telecommunications connectors into this receptacle.
This symbol indicates the presence of a hot surface or hot component. If this surface is contacted, the
potential for injury exists.
WARNING!
To reduce the risk of injury from a hot component, allow the surface to cool before
touching.
These symbols on power supplies or systems indicate the equipment is supplied by multiple sources of
power.
WARNING!
To reduce the risk of injury from electric shock, remove all power cords to completely
disconnect power from the system.
This symbol indicates that the component exceeds the recommended weight for one individual to
handle safely.
WARNING!
To reduce the risk of personal injury or damage to the equipment, observe local
occupational health and safety requirements and guidelines for manual material handling.
To reduce the risk of personal injury or damage to the equipment, adequately stabilize
To reduce the risk of personal injury or damage to the equipment:
When installing the HP PC Blade Enclosure in a Telco rack, adequately secure the rack