Checking the hardware
After unpacking the component to be installed, locate the documentation that was shipped with that
component. Verify that you received all of the listed hardware pieces.
You will typically have extra fasteners after completing your component installation.
IMPORTANT:
Retain the extra fasteners for future use.
Hardware kit contents
If any of the following items are missing or damaged, contact your Hewlett Packard Enterprise authorized
reseller.
1
Item
1
2
3
4
Required tools
The following tools are required for installation:
•
Flathead screwdriver
•
T-25 Torx driver
•
T-30 Torx driver
•
Adjustable wrench
•
Cage nut insertion tool
For comfort and efficiency while setting up your rack, use power tools where applicable.
Removing the rack doors
To provide access to all sides of the rack while you are installing the various components, first remove the
rack doors. If your rack has side panels, also remove them before installing mounting brackets and other
hardware.
8
Checking the hardware
2
Description
Door/side panel key
Leveling pads
Baying bracket, 24"
Baying bracket, 6mm
3
Quantity
2
4
4
4