Snmp Configuration - HP BladeSystem bc2000 - Blade PC User Manual

Table 4-8 Network Configuration Field Descriptions — Protocols Area (continued)
SNMP
Secure Shell
Telnet
Table 4-9 Network Configuration Field Descriptions — Network Area
Field
Network Area
DHCP
Static IP
Dynamic DNS
IP Address
Subnet Mask
Gateway Address
DNS Server 1
DNS Server 2

SNMP Configuration

The SNMP Configuration screen (shown below) enables an enclosure administrator to modify the SNMP
settings of an enclosure. These settings are specific to the enclosure and do not affect the network
configurations for blade PCs.
Two buttons appear at the bottom of this screen:
●
Apply — Saves changes made to the screen.
●
Cancel — Restores all fields on the screen to their original values.
26 Chapter 4 Web Browser Interface
Enabled or Disabled.
Enabled or Disabled.
Enabled or Disabled.
Possible Values
###.###.###.###, where ### ranges
from 0 to 255.
###.###.###.###, where ### ranges
from 0 to 255.
###.###.###.###, where ### ranges
from 0 to 255.
###.###.###.###, where ### ranges
from 0 to 255.
###.###.###.###, where ### ranges
from 0 to 255.
The default setting is Enabled.
The default setting is Enabled.
The default setting is Enabled.
Description
Gets the IP address of the Integrated
Administrator from the DHCP.
Sets a static IP address of the Integrated
Administrator.
Determines whether the Integrated
Administrator uses Dynamic DNS.
Static IP address for the Integrated
Administrator (mandatory if Static IP is
selected).
Subnet mask for the Integrated
Administrator (mandatory if Static IP is
selected).
Gateway address for the Integrated
Administrator (optional field if Static IP is
selected).
The IP address for the primary DNS
server (optional field if Static IP is
selected).
The IP address for the secondary DNS
server (optional field if Static IP is
selected).
ENWW