HP BladeSystem bc2000 - Blade PC User Manual page 98

To access the ROM-Based Setup Utility (RBSU) for a blade PC using the Web-based user interface:
1. Click the Bays tab.
2. Click Bay List in the left panel.
3. Select the bay from the bay list.
4. Click Remote Console at the bottom of the screen.
5. Click Remote Console from the Remote Console screen.
6. If the blade PC is running the Windows 2000 operating system:
a. Return to the Web-based user interface and click Virtual Buttons in the left panel.
CAUTION:
a blade PC.
b. If the blade PC is off, select Power On at the bottom of the screen; otherwise, select
Reboot at the bottom of the screen.
c. Click Apply and return to the remote console session.
7. When prompted, press
a. Press Esc.
b. Press the
8. To exit RBSU:
a. Press Esc.
b. When prompted, press F10, press the
9. To close the remote console session:
a. Press the
b. Press the
To access the RBSU for a blade PC using the command line interface:
CAUTION:
1. If the blade PC is running the Windows 2000 operating system, reboot the blade PC by entering
the following commands sequentially:
REBOOT BAY <bay number>
Yes
2. Connect to the blade PC by observing its bay number and typing:
CONNECT BAY <bay number>
3. When prompted, press the
a. Press Esc.
b. Press the
90 Chapter 7 Performing Common Administrative Tasks
Without the blade PC health driver, the Integrated Administrator cannot reboot
F10 for ROM-Based Setup Utility:
0 key.
Ctrl+Shift+_ keys.
D key.
Without the blade PC health driver, the Integrated Administrator cannot reboot a blade PC.
F10
0 key.
Esc key and the
key for ROM-Based Setup Utility for Blade PCs:
0 key to confirm.
ENWW