6.
Type the rack name.
7.
Click Apply.
To modify the enclosure name or rack name using the CLI, type the following commands sequentially:
SET ENCLOSURE NAME <enclosure name>
NOTE:
The <enclosure name> must be 1-32 characters long and includes all alphanumeric, the dash,
and the underscore characters.
The default enclosure name is IA-XXXXXXXXXXXX where XXXXXXXXXXXX is replaced with the actual
MAC address: SET RACK NAME <rack name>
NOTE:
The <rack name> must be a maximum of 32 characters long and includes all alphanumeric,
dash, and underscore characters. The default rack name is UnnamedRack.
Modifying the Asset Tag Number
To modify the asset tag number using the Web-based user interface:
1.
Click the Enclosure tab.
2.
Click Enclosure Information in the left panel.
3.
Scroll down to the General area.
4.
Click the Asset Tag field.
70
Chapter 6 Setting Up the System
ENWW