HP BladeSystem bc2000 - Blade PC User Manual page 73

Table 5-9 Functions Exclusive to the Command Line Interface — Enclosure Management Commands
(continued)
SHOW ENCLOSURE
STATUS
UPDATE IMAGE <URL>
UPLOAD CONFIG <url>
CLEAR SESSION BAY
<bay number>
CLEAR BAY BOOT [FIRST |
ONCE] [ALL | <bay number>
{[ , | - ] <bay number>}]
GENERATE NMI <bay
number>
POWERON BAY <bay
number> {[ , | - ] <bay
number>} {[PXE | HDD |
RBSU]}
REBOOT BAY <bay
number> {[ , | - ] <bay
number>} {FORCE} {[PXE |
HDD | RBSU]}
SET BAY BOOT FIRST
[HDD | PXE] <bay number>
{[ , | - ] <bay number>}
SET BAY BOOT ONCE
[HDD | PXE | RBSU] <bay
number> {[ , | - ] <bay
number>}
ENWW
(measured in Hertz), part number, serial number, and hardware
revision for the specified power supply if one is specified or for
all power supplies if ALL is given.
Under an enclosure status heading, this command displays the
health of the enclosure, Integrated Administrator health, and
unit identification LED.
Under a power status heading, this command displays the
power status and capacity.
Downloads a new image from a server over the network and
uses the image to update the firmware of the enclosure.
Uploads the current runtime configuration to the specified FTP
or TFTP server.
Terminates a Terminal session from the enclosure.
Clears the setting for the IPL to be passed to the blade at the
next reboot. The "FIRST" argument resets the IPL for all
subsequent reboots. The "ONCE" argument resets the IPL for
the next reboot only. This command is only valid for present
blades.
This command may require a firmware upgrade for the BIOS
ROM of certain HP blade PCs.
Powers on the specified blade PC.
If no blade PC is in the specified bay, the user is told that the
bay is empty.
The optional boot arguments may require a firmware upgrade
for the BIOS ROM of certain HP blade PCs.
Adding an optional boot argument forces the blade to abandon
the regular boot order and forces a boot using the specified
method.
Sends a request to the blade PC to perform a graceful
shutdown.
The blade PC is then powered on. If no blade PC is in the
specified bay, the user is told that the bay is empty.
The optional boot arguments may require a firmware upgrade
for the BIOS ROM of certain HP blade PCs.
Adding an optional boot argument with force the blade to
abandon the regular boot order and force a boot using the
specified method.
Sets the IPL for each subsequent reboot. This setting is only
valid for present blades and is cleared if a blade is removed.
This command may require a firmware upgrade of the BIOS.
Sets the boot device to be used on the next boot of the bay(s)
specified. This setting is only valid on present blades and is
cleared if the blade is removed.
Functionality Exclusive to the Command Line Interface
number, and hardware
revision.
The command line adds the
Integrated Administrator
health.
All
All
All
Only enclosure and group
administrators may execute
this command.
Allows for optional boot
argument
Allows for optional boot
argument
Only enclosure administrators
may execute this command
Only enclosure administrators
may execute this command.
65