Appendix B Error Messages; Warning Messages; Enclosure Warning Messages; Blade Pc Warning Messages - HP BladeSystem bc2000 - Blade PC User Manual

B Error Messages
The messages provided in this appendix are divided into the following categories:
●

Warning messages

●
Error messages
Warning Messages
This section provides a comprehensive list of warning messages specific to the major components of
the Integrated Administrator. These warning messages advise you that you have implemented a
configuration change or prompt you to confirm whether you wish to proceed with your requested action.

Enclosure Warning Messages

Table B-1 Enclosure Warning Messages
Warning Message
Are you sure you want to disable the Web protocol? Disabling this protocol will
prevent access to the Web-based user interface until a terminal session re-enables
the Web protocol.
Are you sure you want to disable the Secure Shell protocol? Disabling this protocol
will prevent access to the Web-based user interface and Secure Shell terminal
interface until a terminal session re-enables the Secure Shell protocol.
The SNMP protocol is currently disabled. The new settings will not take effect until
this protocol is enabled on the Network Configuration screen.
The Read Community field is empty. The Read Community will be set to "public".
The SNMP protocol may be disabled on the Network Configuration screen.
Are you sure that you want to power off the enclosure?
Are you sure that you want to restart the Integrated Administrator? This process will
take several minutes.
Are you sure that you want to clear the system log?
Enabling IP Security may disconnect this session. Are you sure you still want to
perform this action?

Blade PC Warning Messages

Table B-2 Blade PC Warning Messages
Warning Message
ENWW
Cause
Attempting to disable the Web (HTTP /
HTTPS) protocol
Attempting to disable the Secure Shell
protocol
Changing an SNMP value with the
SNMP protocol disabled
Attempting to set a blank Read
Community string
Attempting to power off the enclosure
Attempting to restart the Integrated
Administrator
Attempting to clear the system log
Attempting to enable IP Security
Cause
Warning Messages 119