HP BladeSystem bc2000 - Blade PC User Manual page 130

Table B-6 Administration Error Messages (continued)
The group name is blank. Please enter a valid
name.
The maximum number (20) of groups exists on the
system.
The Password fields are empty. Please enter a
value in each password field.
The Password field is empty. Please enter a
password.
The Confirm Password field is empty. Please enter
a password.
The password must be at least 3 characters in
length. Please enter a new password.
The passwords do not match. Please try again.
NTP Poll-Interval has to be between 60 and 9999
seconds.
Invalid NTP address supplied. IP address should
be in ###.###.###.### format where ### is
between 0 and 255.
###.###.###.### is not a valid NTP server.
Please set at least the Primary NTP server before
enabling NTP.
<IP address> is already set as secondary NTP
server.
<IP address> is already set as primary NTP server. Attempting to set the secondary
Primary NTP server is already cleared.
The secondary NTP server is already cleared.
Please set the primary NTP server first.
Invalid IP address supplied. IP address should be
in ###.###.###.### or ###.###.###.###/## format
where ### is between 0 and 255 and ## is between
0 and 32.
122 Appendix B Error Messages
Attempting to create a group with a
blank group name
Attempting to create a 21st group
Attempting to create a user with a
blank password
Attempting to create a user with a
blank Password field
Attempting to create a user with a
blank Confirm Password field
Attempting to create a user with a
password that is less that 3
characters long
Different strings in the Password
and Confirm Password fields
Attempting to set an NTP poll
interval that is not between 60 and
9999 seconds.
Attempting to enter an IP address
that is not in the correct format.
Attempting to set an NTP server
address, but the address entered is
not an NTP server.
Attempting to enable the NTP
server before enabling the primary
NTP server set.
Attempting to set the primary NTP
server to <IP address> when the
<IP address> is already set as
secondary.
NTP server to <IP address> when
the <IP address> is already set as
primary.
Attempting to clear the primary NTP
server that has previously been
cleared or never set.
Attempting to clear the secondary
NTP server that has previously
been cleared or never set.
Attempting to set the secondary
NTP server without first setting the
primary NTP server.
Attempting to set an IP address that
is not in the correct format.
N/A
N/A
3-8 characters including all
printable characters
3-8 characters including all
printable characters
3-8 characters including all
printable characters
3-8 characters including all
printable characters
3-8 characters including all
printable characters
60-9999
###.###.###.### where ### is
between 0 and 255
N/A
N/A
N/A
N/A
N/A
N/A
N/A
###.###.###.### where ### is
between 0 and 255 and ## is
between 0 and 32.
ENWW