Generating An Enclosure Summary - HP BladeSystem bc2000 - Blade PC User Manual

3. Click Toggle ON or Toggle OFF depending on the current state of the Unit Identification LED for
the enclosure.
To change the state of the Unit Identification LED for the enclosure using the CLI, type:
SET ENCLOSURE UID [ON | OFF]
Only enclosure administrators may execute this command.

Generating an Enclosure Summary

You can generate a printable synopsis of all the data for the enclosure including the enclosure name
and type; the part, serial, and asset tag numbers of the enclosure; the software and hardware versions
of the Integrated Administrator; the MAC address of the Integrated Administrator; and the type, part
number, and serial number of the interconnect tray.
To generate a printable synopsis of all the data for the enclosure using the Web-based user interface,
click Printable View in the top panel. The Web-based user interface opens a new window that shows
all enclosure information, which you can copy and paste into a printable file.
96 Chapter 7 Performing Common Administrative Tasks ENWW