Adding Memory; Removing A Memory Module; Installing A Memory Module - HP A524x - Pavilion - 512 MB RAM Manual

Hp pavilion desktop pcs - upgrading and servicing guide
Hide thumbs Also See for A524x - Pavilion - 512 MB RAM:
Table of Contents

Advertisement

adding memory

The motherboard contains sockets for DDR DIMMs
(double data rate dual in-line memory modules). The
exact number of sockets depends on which model you
have.
To determine which type of memory module your
PC uses, and for specific memory module information
and specifications, go to the Web site listed in your
Warranty and Support Guide and click the
Support link.
WARNING: Using the wrong type of
memory module could damage the
system.

removing a memory module

1 Complete the procedures to prepare the PC, and
remove the side panel. See "opening and closing
the PC" on page 1.
2 Gently lay the PC on its side.
3 Locate the memory sockets on the motherboard.
CAUTION: When handling a memory
module, be careful not to touch any of
the contacts. Doing so may damage the
module.
4 Move any cabling out of the way, if necessary.
WARNING: Do not pull the memory
module out of the socket. Use the
retaining clips to eject the module.
5 Push down the two retaining clips on the ends of
the socket until the memory module pops out of the
socket.
6 Hold the memory module by its edges only, as you
lift it away from the socket. Store it in its antistatic
packaging.

installing a memory module

Upgrade the memory in your PC with memory of the
same type and speed as the memory originally
installed in your PC.
CAUTION: When handling a memory
module, be careful not to touch any of
the contacts. Doing so may damage the
module.
1 Open both latches of the memory module socket.
See "removing a memory module" on page 11.
If you are replacing a memory module, put the
new memory module in the same memory slot
from which the old memory was removed.
Or
If you are adding a memory module, install the
new module into the socket nearest the
preinstalled module, and install additional
modules in the next available sockets.
2 Hold the new memory module only by its edges as
you remove it from the antistatic packaging. (Avoid
touching the memory chips or the gold contacts on
the module.)
upgrading and servicing guide
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pavilion a500

Table of Contents