Setup Menu - Lexmark C746 User Manual

Understanding printer menus
Use
Separator Sheet Source
Tray [x]
Manual Feeder
Blank Pages
Do Not Print
Print

Setup menu

Use
Printer Language
PS Emulation
PCL Emulation
Job Waiting
On
Off
Print Area
Normal
Whole Page
To
Specify the paper source for separator sheets.
Notes:
•
Tray 1 (standard tray) is the factory default setting.
•
From the Paper menu, Configure MP must be set to Cassette in order for
Manual Feeder to appear as a menu setting.
Specify whether blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.
To
Set the default printer language.
Notes:
•
PS Emulation is the factory default printer language. PS
emulation uses a PS interpreter for processing print jobs.
• PCL Emulation uses a PCL interpreter for processing print
jobs.
• Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Specify if print jobs are removed from the print queue when they
require unavailable printer options or custom settings. These print
jobs are stored in a separate print queue, so other jobs print
normally. When the missing information or options are obtained,
the stored jobs print.
Notes:
•
Off is the factory default setting.
• This menu item appears only when a non-read‑only printer
hard disk is installed. This requirement ensures that stored
jobs are not deleted if the printer loses power.
Set the logical and physical printable area.
Notes:
• Normal is the factory default setting. When attempting to
print data in the non‑printable area defined by the Normal
setting, the printer clips the image at the boundary.
•
Whole Page allows images to be moved into the
non‑printable area defined by the Normal setting, but the
printer clips the image at the Normal setting boundary. This
setting affects only pages printed using a PCL 5e interpreter.
This setting has no effect on pages printed using the PCL XL
or PostScript interpreter.
172