Security Audit Log Menu - Lexmark C746 User Manual

Understanding printer menus
Use
Wiping Mode
Auto
Manual
Off
Manual Wiping
Start now
Do not start now
Automatic Method
Single pass
Multiple pass
Manual Method
Single pass
Multiple pass
Scheduled Method
Single pass
Multiple pass

Security Audit Log menu

Use
Export Log
Delete Log
Yes
No
To
Specify the mode for disk wiping.
Note: Auto is the factory default setting. The printer determines when to initiate a
disk wipe.
Overwrite the disk space that has been used to hold data from a processed print job.
This type of wiping does not erase any information related to an unprocessed print
job.
Notes:
• "Do not start now" is the factory default setting.
•
If the Disk Wiping access control is activated, then a user must successfully
authenticate and have the required authorization in order to initiate the disk
wipe.
Mark the disk space used by a previous print job. This method does not permit the
file system to reuse this space until it has been cleared.
Notes:
•
"Single pass" is the factory default setting.
•
Only automatic wiping enables users to activate disk wiping without having to
turn the printer off for an extended amount of time.
• Wipe highly confidential information using only the Multiple pass method.
Allow the file system to reuse marked disk space without having to wipe it first.
Notes:
•
"Single pass" is the factory default setting.
•
Highly confidential information should be wiped using the Multiple pass
method only.
Allow the file system to reuse marked disk space without having to wipe it first.
Note: "Single pass" is the factory default setting.
To
Enable an authorized user to export the audit log.
Notes:
•
To export the audit log from the printer control panel, attach a flash drive into
the printer.
•
From the Embedded Web Server, download the audit log into a computer.
Specify whether audit logs are deleted.
Note: Yes is the factory default setting.
161