Loading Paper And Specialty Media; Setting The Paper Size And Type; Configuring Universal Paper Settings - Lexmark C746 User Manual

Using C746x
Use the
8 Home button
9 Indicator light
10 USB port

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information,
see "Avoiding jams" on page 201 and "Storing paper" on page 128.

Setting the paper size and type

1
From the printer control panel, navigate to:
> Settings >
2
Press the up or down arrow button to select the paper tray or feeder, and then press
3
Press the up or down arrow button to select the paper size, and then press
4
Press the up or down arrow button to select the paper type, and then press

Configuring Universal paper settings

The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer
menus.
Notes:
•
The smallest supported Universal size is 76.2 x 127 mm (3 x 5 in.) and is loaded only in the multipurpose feeder.
•
The largest supported Universal size is 215.9 x 1219.2 mm (8.5 x 48 in.) and is loaded only in the multipurpose
feeder.
From the printer control panel, navigate to:
> Settings > > Paper Menu >
measure >
To
Go to the home screen.
Check the status of the printer.
•
Off—The printer is off.
•
Blinking green—The printer is warming up, processing data, or printing.
• Solid green—The printer is on, but idle.
• Blinking red—The printer requires operator intervention.
Connect a flash drive to the printer.
> Paper Menu > > Paper Size/Type >
> Universal Setup >
.
to change the settings.
> Units of Measure >
48
.
> select unit of