CHAPTER 7 MANAGEMENT AND SETTING
@ Method copy start
@
@
@
@
1
Press the
or
key to select the desired copy start
method.
(Inch)
(Metric)
2
Press the OK key. The machine will return to the copy default
setting screen.
#
# Start late time
#
#
#
NOTE
• If "@ Method copy start" is set to "Start key", this item cannot be set.
1
Press the
or
key to select the desired delay time for
auto start.
The time can be set to from 0.5 second to 5 seconds.
(Inch)
(Metric)
2
Press the OK key. The machine will return to the copy default
setting screen.
7-20
$ Paper cut [Selec.cut. Method]
$
$
$
$
NOTE
• The sizes displayed depend on the setting of "# Standard size set" of
the machine default setting.
1
Press the
or
key to select the desired cut size.
(Inch)
(Metric)
2
Press the OK key. The machine will return to the copy default
setting screen.
%
%
%
%
% Sync. Cut length
1
To display the synchronized cut length, press the
to select "ON".
(Inch)
(Metric)
2
Press the OK key. The machine will return to the copy default
setting screen.
or
key