Group Copy - Kyocera KM-4850w Operation Manual

8
Press the Start key. Copying of the remaining sets will start.
(Inch)

(2) Group copy

This mode makes multiple copies grouped by original.
NOTE
• For information about setting the copier to group mode when the copier
has been reset to its default state (after the Reset key has been
pressed), see "› Batch scanning" of the default setting on page 7-7 .
1
Press the Sort/Group key twice. The Sort/Group indicator will
light up.
(Inch)
(Metric)
(Metric)
CHAPTER 5 FUNCTIONAL COPYING
2
Make copy settings such as the number of copies.
(Inch)
(Metric)
NOTE
• The number of copies cannot be changed when an original is being
scanned or after an original is scanned.
3
Set the first original. Scanning of the original will start and
copies will be output.
4
When the message "Insert next original" appears, make copy
settings for the next original.
(Inch)
(Metric)
5
Set the next original. Scanning of the original will start.
Repeat steps 4 and 5 for remaining originals.
NOTE
• The maximum number of originals that can be scanned is 160. For the
maximum number in job reserve, see ") Maximum Jobs" of the default
setting on page 7-6.
6
When scanning of originals is complete, press the OK key.
5-13