Kyocera KM-4850w Operation Manual page 65

Items for manager only
Setting item
9 Standard drawer
Default paper source can be selected.
0 Auto select set
Default copy mode ("APS", "AMS", or "Manual") can be selected.
! AMS mode
If a paper source is specified when the APS mode has been set,
copying with a preset magnification ratio or the AMS mode will be
selected. Whether copying with a preset magnification ratio ("OFF") or
the AMS mode ("ON") is selected can be specified.
@ Method copy start
If "Start key" is selected, scanning of original will start when the Start
key is pressed after an original has been set. If "Auto start" is selected,
scanning of original will start automatically when an original is set.
# Start late time
If "@ Method copy start" is set to "Auto start", the time between setting
of original and start of copying can be set.
$ Paper cut
Default paper cut size can be selected.
[Selec.cut. Method] "User 1" and "User 2" are the lengths that have been set by "4 Cut
size register".
Details
CHAPTER 7 MANAGEMENT AND SETTING
Selectable values
Paper source 1 (only if
an optional roll unit is
installed)/ paper source
2/ paper source 3/
bypass
APS/ AMS/ Manual
ON/OFF
Auto start/
Start key
0.5 sec./ 1 sec./ 2 sec./
3 sec./ 4 sec./ 5 sec.
For A sizes (metric
machine)
Synchronized cut/ 1189
mm/ 841 mm/ 594 mm/
420 mm/ 297 mm/ User
1, 2
For B sizes (metric
machine)
Synchronized cut/ 1030
mm/ 728 mm/ 515 mm/
364 mm/ User 1, 2
Architecture (inch
machine)
Synchronized cut/ 12.0"/
18.0"/ 21.0"/ 24.0"/
36.0"/ 42.0"/ 48.0"/
User 1, 2
Engineering (inch
machine)
Synchronized cut/ 11.0"/
17.0"/ 21.0"/ 22.0"/
34.0"/ 42.0"/ 44.0"/
User 1, 2
Default Page
Paper
source 2
7-19
Manual
7-19
OFF
7-19
Auto start
7-20
0.5 sec.
7-20
Synchro-
nized cut
7-20
7-5