Kyocera KM-4850w Operation Manual page 63

Setting item
@ Custom media type
Material, fixing temperature, and copy size for custom paper can be
[Custom.pap.material] set. These settings are associated with custom settings of copy size
and fixing temperature adjustment.
# Standard size set
Select the type of originals and paper to be used: "architecture" or
"engineering" ["A sizes" or "B sizes"]. This setting affects the standard
cut length and paper width and original width to be detected automati-
cally by this machine.
$ Auto roll over
If paper of the same size is set in multiple paper sources, when paper
in a paper source runs out during copying, another paper source will
be automatically selected and copying will continue. If "2 Media Type
[Paper working]" is set to "ON", however, auto roll over will not function
between different paper materials of the same size.
% Management #
The password for the default setting for manager can be changed.
[Manage.code] * It is recommended to write the code down when it is changed.
Details
CHAPTER 7 MANAGEMENT AND SETTING
Selectable values
Plain
145˚C, 155˚C, 165˚C
Vellum
165˚C, 175˚C, 185˚C
Film
150˚C, 160˚C, 170˚C
Copy size:
X (widthwise direction)
-3.0% to +3.0%
Y (lengthwise direction)
-3.0% to +3.0%
Architecture/ engineer-
ing (A sizes/ B sizes)
ON/OFF
0000 to 9999
Default Page
Vellum
165˚C
X: 0.0%
Y: 0.0%
7-15
Architec-
ture (A
sizes)
7-15
OFF
7-15
4850
7-16
7-3