Kyocera KM-4850w Operation Manual page 40

CHAPTER 5 FUNCTIONAL COPYING
The shift direction and the shift amount will be displayed in
6
the top line of the message display.
• To change the settings, press the
"Change".
• To accept the settings without change, ensure that "ON" is
selected.
7
Press the OK key.
• If "Change" has been selected, proceed to the next step.
• If "ON" has been selected, proceed to step 10.
8
Press the or key to select up or down and change the
shift amount using the numeric keys.
(Inch)
(Metric)
9
Press the OK key.
> Setting of shift to right or left
10
To shift the image to the right or left, press the
select "Side".
To complete the setting, ensure that "End" is selected and
press the OK key. The machine will return to the basic
screen.
(Inch)
(Metric)
11
Press the OK key.
5-6
or key to select
or key to
The shift direction and the shift amount will be displayed in
12
the top line of the message display.
• To change the settings, press the
"Change".
• To accept the settings without change, ensure that "ON" is
selected.
13
Press the OK key.
• If "Change" has been selected, proceed to the next step.
• If "ON" has been selected, proceed to step 16.
14
Press the O or P key to select right or left and change the
shift amount using the numeric keys.
(Inch)
(Metric)
15
Press the OK key.
16
To complete the setting, ensure that "End" is selected and
press the OK key. The machine will return to the basic
screen.
> Canceling all image shift settings
17
To cancel all image shift settings, press the
select "Cancel" and press the OK key. The machine will
return to the basic screen.
or key to select
or key to