Canceling Copying - Kyocera KM-4850w Operation Manual

7. Canceling Copying

The method for canceling copying varies with the situation.
Use the proper procedure in accordance with the situation.
Situation
To stop immediately scanning:
To stop scanning of original in the sort copy mode:
To stop immediately output of paper while the copy
is being output: (to cut the paper at some midpoint)
To stop output of paper while the copy is being
output: (to stop after ejecting the paper in progress)
To cancel a reserved job:
To cancel reserved repeat copy:
Press the Scan Stop key. Scanning of original will stop. Open the original cover and
remove the original.
Press the Stop/Clear key.
Press the Roll Cut key.
Press the Stop/Clear key.
Press the Add Job key for more than two seconds. A screen for deleting reserved jobs will
appear. Delete the desired job referring to "2. Canceling job reserve". (Page 6-8)
Press the Repeat Copy key.
CHAPTER 4 BASIC COPYING
Operation
4-9