Kyocera FS-C5100DN Advanced Operation Manual page 52

>Agenda
Copies
>Agenda
Delete
>Job Box
Configuration
>>Quick Copy
>>Quick Copy
2-28
Deleting a Private/Stored Job
You can individually delete stored jobs by performing the following
procedure. Jobs saved using Private Print will be automatically deleted if
you turn the power off after printing, but jobs saved using Stored Job will
not be deleted automatically.
1
Follow steps 1 through 6 in the above section.
2
When the title of the job to be printed is displayed (Agenda, in this
example), press [OK]. Enter the four-digit access code entered in the
001
printer driver and press [OK].
3
Press repeatedly until Delete appears for the number of copies.
4
Press [OK]. The private job is deleted.
Job Box Configuration
Change Job Box settings, such as the maximum number of storable
documents in the hard disk, and automatic delete settings.
The following items are available in the Job Box detail settings.
• Changing the Maximum Number of Quick Copy
• Set Automatic Delete times for Temporary Jobs
Changing the Maximum Number of Quick Copy
This changes maximum number of Quick Copy from 0 to 50. The default
is 32.
1
Press while Job Box > is displayed.
2
Press or
>
appears.
3
Press .
4
Press or
32
5
Press [OK]. A blinking cursor (_) appears.
32
6
Press or
The value can be set between 0 and 50. Use
cursor right and left.
7
When the desired maximum number of jobs is set, press [OK].
8
Press [MENU]. The display returns to Ready.
Set Automatic Delete times for Temporary Jobs
1
Press while Job Box > is displayed.
repeatedly until >Job Box Configuration >
repeatedly until >>Quick Copy appears.
to increase or decrease the value at the blinking cursor.
and to move the
Using the Operation Panel