Status Page - Kyocera FS-C5100DN Advanced Operation Manual

>Print

Status Page ?

Using the Operation Panel
Print Status Page
You can check the printer's current status, including available memory
space and option settings by printing a status page.
1
Press while Report Print > is displayed.
2
Press or
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. The message Processing appears and the
printer prints a status page.
For a sample status page and its full description, refer to the next section
Understanding the Status Page.
Understanding the Status Page
The numbers in the following diagram refer the items explained below the
diagram. The items and values on the status page may vary depending
on the printer's firmware version.
Status Page
Printer
FS-C5300DN
Firmware version
Paper Settings
2
Group Settings
Print Settings
Device Common Settings
Option Status
3
Network
4
repeatedly until >Print Status Page appears.
Interface Block
Memory
Emulation
Counters
Toner Gauges
1
5
6
7
8
9
2-13