Kyocera FS-C5100DN Advanced Operation Manual page 66

>Duplex
? Off
>Override A4/LT
? Off
2-42
1
Press while Print Settings > is displayed.
2
Press or repeatedly until >Duplex appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Press or to display the desired binding mode. The message
display toggles through the following:
Off (default)
Short edge bind
Long edge bind
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
Override A4/LT (Overriding difference between A4 and
Letter)
When the Override A4/LT is turned On using the operation panel, the
printer ignores the difference between A4 and Letter paper sizes. Printing
is performed without an error message even if the actual paper size in the
current cassette differs from the paper size formatting the job.
By default, this feature is On.
1
Press while Print Settings > is displayed.
2
Press or repeatedly until >Override A4/LT appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Select On or Off using
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
or .
Using the Operation Panel