Cf_Input_%1_%2 Command - Sanyo PLC-WK2500 - 2500 Lumens Manual

PLC-WK2500 Expand Serial Command Functional Specifications
8.6.6

CF_INPUT_%1_%2 Command

Command "CF_INPUT_%1_%2"[CR]
"COMPUTER1" ------ Select Computer1 Input
"COMPUTER2" ------ Select Computer2 Input
%1
"VIDEO" ---------------- Select Analog Input
"S-VIDEO" ------------- Select S-video Input
When %1 is COMPUTER1
"ANALOG" ----------Select Analog RGB Input
"YPBPR" ------------- Select Component
"S-VIDEO" ---------- Select S-Video Input
%2 "SCART" ------------- Select SCART
When %1 is COMPUTER2
"ANALOG" ---------- Select Analog RGB Input
When %1 is VIDEO
"VIDEO" ------------ Select Video Input
Select Input specified by %1 and also Source specified by %2 at once
This command is available in normal Power ON status.
Details
Projector returns "101" by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
28 / 74