Cf_Input5 Command; Cf_Input_%1_%2 Command - Sanyo PLC-WXU300 - 2500 Lumens Manual

PLC-WXU300 Expand Serial Command Functional Specifications
8.6.7

CF_INPUT5 Command

Command "CF_INPUT5 _%1"[CR]
%1 "S-VIDEO" ----------------- Select S-video Input
Select S-video input and source specified in %1 at once..
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.6.8

CF_INPUT_%1_%2 Command

Command "CF_INPUT_%1_%2"[CR]
"COMPUTER1" ------ Select Computer1 Input
"COMPUTER2" ------ Select Computer2 Input
%1 "HDMI" ------------------ Select HDMI Input
"VIDEO" ---------------- Select Video Input
"S-VIDEO" ------------- Select S-video Input
When %1 is COMPUTER1
ANALOG" ----- Select Analog RGB Input
"YPBPR" -------- Select Component Input
"SCART" -------- Select SCART Input
When %1 is COMPUTER2
%2
"ANALOG" ----- Select Analog RGB Input
When %1 is VIDEO
"VIDEO" --------- Select Video Input
When %1 is S- VIDEO
"S-VIDEO" ------ Select S-Video Input
Select Input specified by %1 and also Source specified in %2
This command is available in normal Power ON status.
Details
Projector returns "101" by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
26/72