Sound Command; Cf_Volume Command; Cf_Mute Command; Cf_Mic Command - Sanyo PLC-WK2500 - 2500 Lumens Manual

PLC-WK2500 Expand Serial Command Functional Specifications

8.9 Sound Command

8.9.1

CF_VOLUME Command

Command "CF_VOLUME_%1"[CR]
"000-063" -------------------------- Directly select Volume setting value
%1 "UP" --------------------------------- Current Volume setting value +1
"DN" --------------------------------- Current Volume setting value -1
Control Volume value
The same operation of Volume Up/Down as projector and RC, and directly select
Volume setting value. When setting Volume value, the Sound Mute ON status is
Details
canceled just like RC operation. The value set by this command is stored in
Projector.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.9.2

CF_MUTE Command

Command "CF_MUTE_%1"[CR]
"ON" ----------------------------- Set Sound Mute to ON
%1
"OFF" --------------------------- Set Sound Mute to OFF
Control Sound Mute ON/OFF
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.9.3

CF_MIC Command

Command "CF_MIC_%1"ÿ ; CRÿ =
"ON" ----------------------------- Set MIC to ON
%1
"OFF" ---------------------------- Set MIC to OFF
Control MIC ON/OFF
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.9.4

CF_MICGAIN Command

Command "CF_MICGAIN_%1"[CR]
"000-063" -------------------------- Directly select MIC gain setting value
%1 "UP" --------------------------------- Current MIC gain setting value +1
"DN" --------------------------------- Current MIC gain setting value -1
Control MIC gain value
When setting MIC gain value just like operation by menu, the Sound Mute ON
Details
status is canceled. The value set by this command is stored in Projector.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
36 / 74