Cf_Input1 Command; Cf_Input2 Command; Cf_Input3 Command - Sanyo PLC-WK2500 - 2500 Lumens Manual

PLC-WK2500 Expand Serial Command Functional Specifications
8.6.3

CF_INPUT1 Command

Command "CF_INPUT1_%1_"[CR]
"ANALOG" ---------- Select Analog RGB Input
"YPBPR" ------------ Select Component
%1
"Sÿ VIDEO" -------- Select S-Video Input
"SCART" ------------- Select SCART
Select Computer 1 input and source specified by %1 at the same time.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.6.4

CF_INPUT2 Command

Command "CF_INPUT2_%1_"[CR]
%1 "ANALOG" ---------- Select Analog RGB Input
Select Computer 2 input and source specified by %1 at the same time.
This command is available in normal Power ON status.
Details
Projector returns "101" by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Acceptable
Response
Unacceptable
8.6.5

CF_INPUT3 Command

Command "CF_INPUT3_%1_"[CR]
%1 "VIDEO" ----------------- Select Composite video Input
Details Select Video input. This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
27 / 74