PLC-WK2500
Expand Serial Command Functional Specifications
8.4.13
CF_COLBOARD Command
Command
"CF_COLBOARD_%1"[CR]
"RED" --------------Select Red
"BLUE" ------------ Select Blue
%1
"YELLOW" ------- Select Yellow
"GREEN" --------- Select Green
Select Color of Colorboard mode.
Image mode is automatically switched to Colorboard mode by receiving this
command.
Details
The value set by this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.4.14 CF_IMAGEADJ Command
Command
"CF_IMAGEADJ_%1"[CR]
"RST" ------- Reset Image adjustment
"STR1" ----- Store current Image adjustment to Image 1
%1
"STR2" ----- Store current Image adjustment to Image 2
"STR3" ----- Store current Image adjustment to Image 3
"STR4" ----- Store current Image adjustment to Image 4
Reset / store Image adjustment.
Parameter "STR1" to "STR4" is the same as "Image1" to "Image4" displayed when
adjusting Image on OSD menu and selecting "Store"
Details
The value stored to "Image1-4" is saved and its setting is effective even after ALL
is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
22 / 74