Setting Command; Cf_Lang Command; Cf_Menuposition Command - Sanyo PLC-WK2500 - 2500 Lumens Manual

PLC-WK2500 Expand Serial Command Functional Specifications

8.10 Setting Command

8.10.1 CF_LANG Command

Command "CF_LANG_%1"[CR]
"ENG" --------------------------- Select English
"DEU" --------------------------- Select German
"FRA" --------------------------- Select French
"ITA" ----------------------------- Select Italian
"ESP" ---------------------------- Select Spanish
"POR" --------------------------- Select Portuguese
"NED" --------------------------- Select Dutch
"SVE" --------------------------- Select Swedish
"RUS" --------------------------- Select Russian
"CHI" ---------------------------- Select Chinese
%1
"KOR" --------------------------- Select Korean
"JPN" --------------------------- Select Japanese
"FIN" ---------------------------- Select
"POL" --------------------------- Select Polish
"HUN" -------------------------- Select
"ROM" -------------------------- Select
"THA" -------------------------- Select Thai
"TUR" -------------------------- Select Turkish
"KAZ" -------------------------- Select Kazakh
"VIE" --------------------------- Select Vietnamese
Set language for OSD
The language set by this command is stored in EEPROM and its setting is
Details
effective after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.10.2

CF_MENUPOSITION Command

Command "CF_MENUPOSITION_%1"[CR]
%1 "SET" ------------------ Move the menu display to next position
Change the menu position
This command is available in normal Power ON status.
Details The language set by this command is stored in EEPROM and its setting is effective
after ALL is OFF.
Position: center – bottom left-bottom right – top left - top right – center-...
Acceptable
Response
Unacceptable
Finnish
Hungarian
Romanian
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
38 / 74