PLC-WK2500
Expand Serial Command Functional Specifications
8.6 Input Control Command
8.6.1
CF_INPUT Command
Command
"CF_INPUT_%1"[CR]
"CONPUTER1" ----- Select Computer1 Input
"COMPUTER2" ----- Select Computer2 Input
%1
"VIDEO" -------------- Select Video Input
"UP" --------------- The same operation as pressing Up key or Left key
"DN" ----------------The same operation as pressing Down key or Right key
Select Input
The same operation as "INPUT" button of the projector and Remote Control.
This command is available in normal Power ON status.
Details
Projector returns "101" by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Acceptable
Response
Unacceptable
8.6.2
CF_SOURCE Command
Command
"CF_SOURCE_%1"[CR]
Input is
Computer 1
%1
Input is
Computer 2
Input is Video
Select Source of currently selected Input
When Input specified by %1 is inappropriate for selected Input, the projector
Details
returns "101" and the command is not executed.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"ANALOG" ------- Select Analog Input
"YPBPR" ---------- Select Component Input
"Sÿ VIDEO" ------ Select S-Video Input
"SCART" ----------- Select Scart Input
"UP" ----------------- The same operation as pressing Up key or Left
key
"DN" ------------------The same operation as pressing Down key or
Right key
"ANALOG" --------- Select Analog Input
"UP"
"DN"
Although
no
operation
parameter "UP" /"DN"
"VIDEO" ------------- Select Composite Video Input
"UP"
"DN"
Although
no
operation
parameter "UP" /"DN"
"000"[CR]
"Error Code"[CR]
26 / 74
is
executed,
projector
is
executed,
projector
accepts
accepts