Cf_Input1 Command; Cf_Input2 Command; Cf_Input3 Command; Cf_Input_%1_%2 Command - Sanyo PLC-XW300 - 3000 Lumens Manual

PLC-XW200/250/300 Expand Serial Command Functional Specifications
8.6.3

CF_INPUT1 Command

Command "CF_INPUT1_%1_"[CR]
"ANALOG" ---------- Select Analog RGB Input
"YPBPR" ------------ Select Component
%1
"Sÿ VIDEO" -------- Select S-Video Input
"SCART" ------------- Select SCART
Select Computer 1 input and source specified by %1 at the same time.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.6.4

CF_INPUT2 Command

Command "CF_INPUT2_%1_"[CR]
%1 "ANALOG" ---------- Select Analog RGB Input
Select Computer 2 input and source specified by %1 at the same time.
This command is available in normal Power ON status.
Details
Projector returns "101" by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Acceptable
Response
Unacceptable
8.6.5

CF_INPUT3 Command

Command "CF_INPUT3_%1_"[CR]
%1 "VIDEO" ----------------- Select Composite video Input
Details Select Videoinput. This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.6.6

CF_INPUT_%1_%2 Command

Command "CF_INPUT_%1_%2"[CR]
"COMPUTER1" ------ Select Computer1 Input
"COMPUTER2" ------ Select Computer2 Input
%1
"VIDEO" ---------------- Select Analog Input
"S-VIDEO" ------------- Select S-video Input
When %1 is COMPUTER1
"ANALOG" ----------Select Analog RGB Input
"YPBPR" ------------- Select Component
"S-VIDEO" ---------- Select S-Video Input
%2 "SCART" ------------- Select SCART
When %1 is COMPUTER2
"ANALOG" ---------- Select Analog RGB Input
When %1 is VIDEO
"VIDEO" ------------ Select Video Input
Select Input specified by %1 and also Source specified by %2 at once
This command is available in normal Power ON status.
Details
Projector returns "101" by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
23 / 64