Cr_Hpos Command; Cr_ Kystnmode Command; Cr_Ceil Command; Cr_Rear Command - Sanyo PLC-WK2500 - 2500 Lumens Manual

PLC-WK2500 Expand Serial Command Functional Specifications
9.8.5

CR_HPOS Command

Command "CR_HPOS"[CR]
Details Get setting status of Horizontal Position Store Mode
Acceptable
Response
%1
Unacceptable
9.8.6

CR_ KYSTNMODE Command

Command "CR_KYSTNMODE"[CR]
Details Get setting status of Keystone Store Mode
Acceptable
Response
%a
Unacceptable
9.8.7

CR_CEIL Command

Command "CR_CEIL" [CR]
Details Get setting status of Ceiling
Acceptable
Response
%1
Unacceptable
9.8.8

CR_REAR Command

Command "CR_REAR" [CR]
Details Get setting status of Rear
Acceptable
Response
%1
Unacceptable
9.8.9

CR_SCREENASPECT Command

Command "CR_SCREENASPECT"[CR]
Details Get setting status of Screen aspect
Acceptable
Response
%1
Unacceptable
"000_%1"[CR]
"-15" ~ "015"
"Error Code"[CR]
"000_%a"[CR]
"STR" ---------------------- Store mode is "Store"
"RST" ---------------------- Store mode is "Reset"
"Error Code"[CR]
"000_%1"[CR]
"ON" ------------------------------ Ceiling is ON
"OFF" ----------------------------- Ceiling is OFF
"Error Code" [CR]
"000_%1"[CR]
"ON" ------------------------------ Rear is ON
"OFF" ----------------------------- Rear is OFF
"Error Code" [CR]
"000_%1"[CR]
"43MODE"ÿ e ------------------- 4:3 mode is selected
"169MODE" ------------------ 16:9 mode is selected
"1610MODE" ---------------- 16:10 mode is selected
"Error Code" [CR]
61 / 74