Cf_Freeze Command; Cf_Vmute Command - Sanyo PLC-WK2500 - 2500 Lumens Manual

PLC-WK2500 Expand Serial Command Functional Specifications

8.11.4 CF_FREEZE Command

Command "CF_FREEZE_%1"[CR]
"ON" ------------------------ Set Freeze to ON
"OFF" ----------------------- Set Freeze to OFF
%1
"UP" --------------- The same operation as pressing Up key or Left key
"DN" --------------- The same operation as pressing Down key or Right key
Set/Cancel Freeze setting.
Although projector returns "000", receiving another Freeze command does not
Details
release Freeze operation.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable

8.11.5 CF_VMUTE Command

Command "CF_VMUTE_%1"[CR]
"ON" --------------------------- Set No show ON
"OFF" ------------------------- Set No show OFF
%1
"UP" --------------- The same operation as pressing Up key or Left key
"DN" --------------- The same operation as pressing Down key or Right key
Set/Cancel No show setting.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
48 / 74