Screen Status Read Command; Cr_Screen Command; Cr_Vscale Command; Cr_Vpos Command - Sanyo PLC-WK2500 - 2500 Lumens Manual

PLC-WK2500 Expand Serial Command Functional Specifications

9.8 Screen Status Read Command

9.8.1

CR_SCREEN Command

Command "CR_SCREEN"[CR]
Details Get selected on-screen image size
Acceptable
Response %a
Unacceptable
9.8.2

CR_VSCALE Command

Command "CR_VSCALE"[CR]
Details Get setting status of Vertical Scale Store Mode
Acceptable
Response
%1
Unacceptable
9.8.3

CR_VPOS Command

Command "CR_VPOS"[CR]
Details Get setting status of Vertical Position Store Mode
Acceptable
Response
%1
Unacceptable
9.8.4

CR_HSCALE Command

Command "CR_HSCALE"[CR]
Details Get setting status of Horizontal Scale Store Mode
Acceptable
Response
%1
Unacceptable
"000_%a"[CR]
"NORMAL" --------------- Normal mode is selected
"FULL" --------------------- Full mode is selected
"WIDE" -------------------- Wide (16:9) mode is selected
Input
"ZOOM" -------------------- Zoom mode is selected
is
"TRUE" -------------------- True mode is selected
PC
When the screen is set to D.Zoom, projector returns the previous
status (NORMAL )
"CUSTOM" ---------------- Custom mode is selected
"NORMAL" --------------- Normal mode is selected
"FULL" --------------------- Full mode is selected
Input
"WIDE" -------------------- Wide (16:9) mode is selected
is
"ZOOM" -------------------- Zoom mode is selected
Video
"NATURAL" --------------- Natural wide mode is selected
"CUSTOM" --------------- Custom mode is selected
"Error Code"[CR]
"000_%1[CR]
"-32" ~ "032"
"Error Code"[CR]
"000_%1"[CR]
"-15" ~ "015"
"Error Code"[CR]
"000_%1"[CR]
"-32" ~ "032"
"Error Code"[CR]
60 / 74