Cr_Ddots Command; Cr_Dline Command; Cr_Pcstore Command - Sanyo PLC-WK2500 - 2500 Lumens Manual

PLC-WK2500 Expand Serial Command Functional Specifications
9.5.6

CR_DDOTS Command

Command "CR_DDOTS"[CR]
Details Get Display Dots value
Acceptable
Response
%a
Unacceptable
9.5.7

CR_DLINE Command

Command "CR_DLINE"[CR]
Details Get Display Line value
Acceptable
Response
%a
Unacceptable
9.5.8

CR_PCSTORE Command

Command "CR_PCSTORE"[CR]
Get Free/Stored status of MODE1 - MODE5 for PC Adjust.
Details Each data consists of 10 bytes. Each byte indicates the status of
MODE1~MODE10 respectively. (F:Free S:Stored)
Acceptable
Response
%a
Unacceptable
"000_%a"[CR]
"0256"~"nnnn"
(nnnn = Total Dots – Horizontal Position value)
"Error Code"[CR]
"000_%a"[CR]
"0100"~"nnnn"
(nnnn = Total Line – Vertical Position value)
"Error Code"[CR]
"000_%a"[CR]
"FFFFFFFFFF" ----------- All Free
"SFFFFFFFFF" ----------- MODE1 is Stored, others are Free
:
"FFFFFFFFFS" ----------- MODE5 is Stored, others are Free
"SSSSSSSSSS" ---------- All Stored
"Error Code"[CR]
55 / 74