Input Control Command; Cf_Input Command (Network Mode Is Not Available); Cf_Source Command; Cf_Input_%1_%2 Command - Sanyo PLC-XL50A - 2000 Lumens Manual

PLC-XL50 Expand Serial Command Functional Specifications

8.6 Input Control Command

8.6.1

CF_INPUT Command (Network mode is not available)

Command "CF_INPUT_%1"[CR]
"COMPUTER1" ------ Select Computer 1 Input
%1 "COMPUTER2" ------ Select Computer 2 Input
"VIDEO" ---------------- Select Video Input
Select Input (Available only in the normal Power ON status)
The same operation as "INPUT" button of Remote Control.
Details
Note) When Input 2(Computer 2) is set to Monitor Out by Terminal setting,
Projector returns "101" by selecting Input 2.
Acceptable
Response
Unacceptable
8.6.2

CF_SOURCE Command

Command "CF_SOURCE_%1"[CR]
Input is 1
Input is 2
%1
Input is 3
Select Source of currently selected Input
(Available only in the normal Power ON status)
When Input specified by %1 is inappropriate for selected Input, the projector
Details
returns "101" and this command is not executed.
When Input search is On1/On2, this command is not executed while the projector
returns OK.
Acceptable
Response
Unacceptable
8.6.3

CF_INPUT_%1_%2 Command

Command "CF_INPUT_%1_%2"[CR]
"COMPUTER1" ---- Select Computer 1 Input
%1 "COMPUTER2" ---- Select Computer 2 Input
"VIDEO" -------------- Select Analog Input
When %1 is COMPUTER1
"ANALOG" ----- Select Analog RGB Input
"YPBPR" -------- Select Component Input
"SCART" -------- Select SCART Input
When %1 is COMPUTER2
%2 "ANALOG" ------ Select Analog RGB Input
When %1 is VIDEO
"AUTO" ---------- Select Video Auto Mode
"VIDEO" --------- Select Video Input
"S-VIDEO" ------ Select S-Video Input
"YPBPR" -------- Select Component Input
Select Input specified by %1 and also Source specified by %2
(Available only in the normal Power ON status)
Note1) When Input 2(Computer 2) is set to Monitor Out by Terminal setting,
Details
Note2) When Input search is On1/On2, this command is not executed while the
projector returns OK.
Response Acceptable
"000"[CR]
"Error Code"[CR]
"ANALOG" --------- Select Analog Input
"YPBPR" ------------ Select Component
"SCART" ------------ Select Scart Input
"ANALOG" ---------- Select RGB
"AUTO" -------------- Select Vide Auto mode
"VIDEO" ------------- Select Composite Video Input
"Sÿ VIDEO" -------- Select S-Video Input
"YPBPR" ------------- Select Component Input
"000"[CR]
"Error Code"[CR]
Projector returns "101" by selecting Input 2.
"000"[CR]
22/51