Cf_Input 1 Command; Cf_Input 2 Command; Cf_Input 3 Command; Cf_Input 4 Command - Sanyo PLC-HP7000L Technical Specifications

PLC-HP7000L Expand Serial Command Functional Specifications
8.6.3

CF_INPUT 1 Command

Command "CF_INPUT1_%1" [CR]
"DIGITAL" ---------------- Select PC Digital Input
"ANALOG" --------------- Select PC Analog Input
%1 "SCART" ----------------- Select SCART Input
"HDCP" ------------------- Select DVI HDCP Input
"HDMI" -------------------- Select HDMI Input
Select Input 1 as well as Source specified in %1
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
8.6.4

CF_INPUT 2 Command

Command "CF_INPUT2_%1" [CR]
"VIDEO" ---------------------------- Select Composite Video Input
"YPBPR" --------------------------- Select Y, Pb/Cb, Pr/Cr Input
%1
"YCBCR" --------------------------- Select Y, Pb/Cb, Pr/Cr Input
"ANALOG" ------------------------- Select RGB Input
Select Input 2 as well as Source specified in %1.
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
8.6.5

CF_INPUT 3 Command

Command "CF_INPUT3_%1" [CR]
"VIDEO" ---------------------------- Select Composite Video Input
"S-VIDEO" ------------------------- Select S-Video Input
%1
"YPBPR" --------------------------- Select Y, Pb/Cb, Pr/Cr Input
"YCBCR" --------------------------- Select Y, Pb/Cb, Pr/Cr Input
Select Input 3 as well as Source specified in %1.
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
8.6.6

CF_INPUT 4 Command

Command "CF_INPUT4_%1" [CR]
%1 "NETWORK" ----------------------- Select input from PJ-Net
Select Input 4 as well as Source specified in %1. (Available only in the normal
Power ON status)
Details
*With PJ-Net unattached, this command is invalid and error code "103" is returned.
*With PJ-Net attached and the power OFF, error code "101" is returned.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
31/94