Screen Control Command Table; Lamp Command Table; Setting Command Table - Sanyo PLC-HP7000L Technical Specifications

PLC-HP7000L Expand Serial Command Functional Specifications
5.4

Screen Control Command Table

Execute command
CF_SCREEN_%1 [CR]
CF_DZCENT _%1 [CR]
CF_VSCALE_%1[CR]
CF_VPOS_%1[CR]
CF_HSCALE_%1[CR]
CF_HPOS_%1[CR]
CF_KEYSTONE _%1 [CR]
CF_KYSTNMODE _%1 [CR]
CF_CORNER-UL_%1[CR]
CF_CORNER-UR_%1[CR]
CF_CORNER-DL_%1[CR]
CF_CORNER-DR_%1[CR]
CF_CORNERTESTPAT_%1[CR]
CF_CEIL_%1 [CR]
CF_REAR_%1 [CR]
CF_SCREENASPECT_%1 [CR]
5.5

Lamp Command Table

Execute command
CF_LAMPH_%1[CR]
CF_LAMPMODE_%1 [CR]
5.6

Setting Command Table

Execute command
CF_LANG_%1 [CR]
CF_MENUPOSITION_%1 [CR]
CF_MENUSIZE_%1[CR]
CF_INPUTBUTTON_%1[CR]
CF_DISP_%1 [CR]
CF_BACKGND_%1[CR]
CF_LOGO_%1 [CR]
CF_PIP_%1[CR]
CF_PIPMODE_%1[CR]
CF_PIPMAININP_%1_%2[CR]
CF_PIPSUBINP_%1_%2[CR]
CF_PIPSIZE_%1_%2[CR]
CF_PIPPOSITION_%1[CR]
CF_PIPFRAMELOCK_%1[CR]
CF_PIPSTORE_%1[CR]
CF_PIPMODEFREE_%1[CR]
CF_PIPRST_%1[CR]
CF_EDGEBLENDING_%1[CR]
CF_BLEND_%1_%2[CR]
CF_BLENDSTART_%1_%2[CR
]
CF_BLENDBLK_%1_%2[CR]
CF_BLENDBLKALL_%1_%2[C
R]
CF_BLENDTESTPAT_%1[CR]
CF_BLENDRST_%1[CR]
Item
Select Screen size
Cancel Digital Zoom mode
Set V Scale
Set V Position
Set H Scale
Set H Position
Set Keystone correction
Set Keystone store mode
Correct top-left corner
Correct top-right corner
Correct bottom-left corner
Correct bottom-right corner
Select test pattern for Corner correction.
Set ON/OFF of Ceiling
Set ON/OFF of Rear
Set Screen aspect function
Item
Reset total running time for each lamp
Select Lamp mode
Item
Select language for OSD
Select the position of the On-Screen Menu.
Set Menu size
Set up Input search function
Set ON/OFF of On Screen Display
Select screen for no signal
Set PIN code and mode for Logo
Set "Picture in Picture"
Set mode of "Picture in Picture"
Select Input and Source for "Picture in Picture"
(Main picture)
Select Input and Source for "Picture in Picture"
(Sub picture)
Set picture size in "Picture in Picture"
Set position in "Picture in Picture"
Set Frame lock in "Picture in Picture"
Store current status in "Picture in Picture" to User1-5
Clear registration value in User %1 and return to state of
Free.
Reset setting of "Picture in Picture"
Set Edge blending
Set the value of Width for Edge blending
Set the value of Start (Left/Right/Top/Bottom) for Edge
blending
Set Black level(R/G/B) for Edge blending
Set Black level(ALL) for Edge blending
Set Test pattern for Edge blending
Reset Edge blending
13/94