Cf_Pcmodefree Command - Sanyo PLC-HP7000L Technical Specifications

PLC-HP7000L Expand Serial Command Functional Specifications

8.5.11 CF_PCMODEFREE Command

Command "CF_PCMODEFREE_%1" [CR]
"1" --------------------------- Set Mode1 to Free status
"2" --------------------------- Set Mode2 to Free status
"3" --------------------------- Set Mode3 to Free status
"4" --------------------------- Set Mode4 to Free status
"5" --------------------------- Set Mode5 to Free status
%1
"6" --------------------------- Set Mode6 to Free status
"7" --------------------------- Set Mode7 to Free status
"8" --------------------------- Set Mode8 to Free status
"9" --------------------------- Set Mode9 to Free status
"10" ------------------------- Set Mode10 to Free status
Delete the data registered in Custom Mode1–10 and returns it to Free status.
This command operates the same way as storing to Mode1-10 in PC Adjust
Details
Menu.
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
"000" [CR]
"101" [CR] --- When input is Video signal
--- When input is no signal
29/94